Starliner completes OFT-2 test flight with White Sands landing

[ad_1]

After successfully rendezvousing and docking with the International Space Station (ISS), Boeing’s Starliner completed its mission, arriving back to Earth after a six-day-long mission in low Earth orbit. The spacecraft autonomously undocked from the forward-facing port at the Harmony module of the ISS at 2:36 p.m. today, wrapping up its stay at the orbiting laboratory.

Boeing and NASA teams saw Starliner touchdown at 6:49 p.m. Eastern on Wednesday, May 25, 2022, at White Sands Space Harbor at the US Army’s White Sands Missile Range Facility in New Mexico. 

Mission Overview

This was the second flight of Boeing’s Commercial Crew Program Starliner spacecraft which is slated to carry expedition crews regularly to the International Space Station. Named the Orbital Flight Test – 2 (OFT-2), the mission was the company’s second attempt to test the end-to-end capabilities of the Starliner systems, after the first attempt failed to complete several key objectives, including the autonomous rendezvous and docking to the ISS.

Atlas V launches the OFT-2 mission. (Credit: Stephen Marr for NSF)

An investigation into the original Orbital Flight Test – 1 (OFT-1) mission revealed that the capsule’s Mission Elapsed Timer had polled incorrectly, resulting in the spacecraft not executing its orbital insertion burn at the planned time. The teams on the ground also experienced communication issues with the spacecraft, which affected the command and control of the capsule.

A software issue with the service module separation sequence was also found during the mission which would have resulted in the loss of the vehicle had it not been identified and fixed before Starliner returned to Earth.  Boeing teams conducted extensive testing to resolve the problems faced during OFT-1.

The teams were ready to launch the spacecraft on the OFT-2 mission in August of 2021 but faced another issue with the valves in the propulsion systems, causing the launch attempt to scrub and teams to scramble for a fix.  The root cause of the valve issue was determined to be corrosion from nitric acid, which had formed as a result of water vapor in the air reacting with the dinitrogen tetroxide that Starliner uses as an oxidizer.

Ultimately, Boeing decided to swap out the service module for one that had been due to fly the Crew Flight Test (CFT) mission. The new service module incorporates a nitrogen purge system to help mitigate the problem, with spacecraft fueling and pre-launch procedures also amended.

Starliner worked as expected on OFT-2. The spacecraft launched to space on Thursday, May 19 atop United Launch Alliance Atlas V rocket from Space Launch Complex 41 at Cape Canaveral Space Force Station in Florida.

After separating from the Atlas V’s Centaur second stage, Starliner conducted a series of burns using its onboard propulsion systems — designed and built by Aerojet Rocketdyne — to raise its orbit and align itself to the International Space Station. On Friday, May 20, the capsule successfully docked to the orbiting laboratory, marking a major milestone in Boeing’s demonstration flight for NASA’s Commercial Crew Program.

Once docked, the teams continued to work on flight test objectives for OFT-2. On May 21, astronauts opened the hatch of the CST-100 for the first time and moved inside to become the first people to enter the spacecraft in orbit.

Two days later, the astronauts began unloading the cargo and stowing the materials in their places inside the orbital laboratory. Additional docked flight test objectives completed by the teams include:

  • Starliner’s Intra Vehicular Activity (IVA) hatch opened
  • Vestibule pressurized
  • Joint ventilation with ISS established
  • Docked telemetry paths and file transfers verified
  • Vision-based Electro-optical Sensor and Tracking Assembly (VESTA) and flight data files transferred from Starliner to ISS for downlink
  • ISS Portable Computer System connected and checked out
  • Audio checkouts between Starliner and the ISS, Starliner and Mission Control Center Houston, and Starliner and Boeing’s Mission Control Center in Florida conducted
  • Starliner Global Positioning Satellite (GPS) and Inertial Navigation System (INS) from ISS state initialized
  • Recharging spacecraft batteries from the station’s power
  • Starliner Service Module batteries checked out
  • Conduct pre-undock Starliner systems activation and checkout
  • Close Starliner’s IVA hatch
  • Depressurize the vestibule.

Undocking and Return

Similar to the Russian Soyuz, landing on land is one of the unique features of Starliner spacecraft; however, it can land on water as well in case of emergency. Boeing and NASA teams have designated the US Army’s White Sands Missile Range in New Mexico as the primary landing site for spacecraft. On Monday, May 23, NASA and Boeing teams conducted a mission dress rehearsal at the White Sands Space Harbor to practice the landing and recovery procedures ahead of the landing of the spacecraft.

Starliner as seen from the ISS during docking on May 20. (Credit: NASA)

Today, the NASA and Boeing teams performed a GO/NO-GO poll for the spacecraft to undock from the ISS. Once given a GO, the spacecraft configured itself for undocking. After separating from the orbiting laboratory, the spacecraft executed two short-duration burns to further distance itself from the ISS.

BurnDuration (seconds)Time (EST)Time (UTC)
EXDV 1212:36:0218:36:02
EXDV 2812:36:0818:36:08

20 minutes later, Starliner executed a series of 4 burns to exit the Keep Out Sphere and Approach Ellipsoid of the ISS, as it moved over 150 meters away from the orbiting laboratory. These two zones dictate how the vehicles approach and exit the ISS.

The Approach Ellipsoid is over four by two kilometers wide and the keep-out sphere is just 200 meters wide.

BurnTime (EST)Time (UTC)
Outbound Flyaround Maneuver (OFM)12:58:5018:58:50
Departure Initiation Burn (DI)13:13:5019:13:50
Departure Resume Burn (DR)13:28:5019:28:50
NSR Coelliptic burn14:00:5020:00:50

Two hours later, Starliner’s service module executed a final, de-orbit burn which put the spacecraft on the trajectory to land at its planned landing site.

BurnTime (EST)Time (UTC)
Deorbit Burn (DO)16:05:2722:05:27

Once completed, the Starliner’s Service Module — which provides thermal control, power, and on-orbit propulsion — was jettisoned. The Starliner Crew Module aligned itself with the heat shield first as it prepared for the atmospheric re-entry, at 16:32 EST (22:32 UTC).

Starliner landed at White Sands after the OFT-1 mission. (Credit: NASA)

The spacecraft experienced a temporary loss of signal and communication with the ground during the re-entry phase as an envelope of ionized air forms around the spacecraft due to the extreme heat as temperatures can rise to 1,930° C (3,500° F).  Approximately four minutes before touchdown, Starliner’s heat shield was jettisoned, followed by the deployment of the drogue parachutes.

These help to slow the spacecraft down, with the drogues making way for the four main parachutes about one minute and 10 seconds later. Just two minutes and 49 seconds before touchdown, rotation handles deployed which aligned the Starliner to land perpendicularly on the land. Shortly after, its base heat shield was separated, followed by the inflation of airbags which cushioned the spacecraft as it landed at the White Sands Space Harbor in New Mexico.

Once landed, the recovery forces moved toward the spacecraft to secure it. Recovery operations is assisted by numerous NASA and Boeing personnel, including spacecraft engineers and medical professionals.

(Lead photo: Starliner seen from the ISS during docking on May 20. Credit: NASA)

The post Starliner completes OFT-2 test flight with White Sands landing appeared first on NASASpaceFlight.com.

[ad_2]
Space News Source link

Leave a Reply

Your email address will not be published.

Related Posts
Total
0
Share